1. Equipped Items:
√ Prepared for changeable turret.
√ Without Hand wheel, free operation of the machine.
√ 12" Colour Touch Screen for input and display of all machine settings.
√ Full text indication of fault messages.
√ Main pressure lever, equipped with wire strain gauge.
√ Lower punch tightness control with proximity switch.
√ Lubrication of punch guiding machine parts with automatic pressure controlled central lubrication pump.
√Upper punch tightness control with wire strain gauge.
√ Ejection cam with changeable wear plate.
√ Pre and main pressure adjustable independently.
√ Sorting gate for reject tablets in discharge chute during machine start and stop.
√Upper punch shaft bores with oil scraper rings.
√ Lower punch shaft bores with oil scraper rings.
√ Keyed upper punch bores.
√Two fill cams.
√ Upper punch area covered with stainless steel cover.
√ All around dust extraction in demountable segments.
√ Ventilation of the pressing compartment with silencer to minimise noise emission.
√ Force feeder FIIc with drive underneath, closed execution with quick release, two paddle wheels with flat pins for compression of granules.
√ Frequency controlled A/C motor with 4,0 kW capacity.
√ Paint free execution of all with product contact machine parts.
√ Housing in stainless steel AISI 304.
√ Machine base plate elevated 100 mm from floor in order to simplify cleaning and transport (covered).
√ Sockets for vacuum, air pressure and electric connections mounted onthe rear side of the machine.
√ print batch end report
√ display of individual main compression forces
√ product administration
√ missing punches
√ automatic log off from HMI
√ password protection
√ audit trail messages including print out
√ Fat protocol
√ IQ, OQ (only documents) Only in German and English language available
2. Electrical execution
√ According to GAMP guidelines
√ Integrated control cabinet for the complete electrical- electronic control of the machine with plug sockets.
√ Electrical installation created for 400 V, 3-Phase, 50 Hz
√ Other voltage and frequency available as option.
√ Control voltage from built-in transformer 230/24V AC-DC.
√ Total power supply approx. 8.0 kW.
√ Electrical installation according to VDE-Guidelines.
The quoted object is not built in an explosion proof execution, unless there is a written agreement over the same (including the applying prices).
Summary of Technical Parameter
No. of press stations
Maximum tablet Diameter(mm)
Maximum die filling (mm)
Maximum tablet thickness (mm)
Maximum output (tablets/hour)
Compactions force Max. (KN)
Standard Electrical Connection (V)
400 V (±10%) - 50/60 Hz
Maximum installed power (KW)
Machine weight (kg)
Copyright © Zhucheng Baofeng International Group Co., Ltd. All Rights Reserved | Sitemap | Powered by